We designed the power station to be as simple as possible.
Ground tether setup
For the ground tether setup, one should use the 50 meters thin green tether cable, connected to the water hose using tape or Colson straps. The power station is installed in the trailer and connected to the thick black cable. The user extends the cable to the facade he wants to clean. There he connects the thick black tether cable to the thin green tether cable.
If the user wants doesn’t like to mount the power station to the wall of it’s trailer or van, he can take the power station to the facade he wants to clean and directly connect the thin green tether cable.
Roof tether setup
For the ground tether setup, one should use the 15 meters thin green tether cable, connected to the water hose using tape or Colson straps. The power station is installed in the trailer and connected to the thick black cable. The user extends the cable to the facade he wants to clean + the height of the building.
The thick black cable is connected to the carabinier, which carries the weight of the cable (it is very heavy on heigh buildings). The thin green tether cable of 15 meters is connected to the light weight water hose using tape or Colson straps, and is connected to the air-module.
Air-module setup
Install the Air Module only when the drone is powered off.
Remove all batteries from the drone before installation.
Step 1: Remove all batteries from the drone. Take the left battery and attach the larger part of the Air Module to it.
Step 2: Slide the assembled unit carefully into the drone, ensuring that no cables are damaged.
Step 3: Thread the dummy side underneath the drone and insert it into the right side battery compartment.
Step 4: Insert the battery on the Right side
Step 5: Secure the batteries by rotating the top part of the lock.