The power station is designed to be as simple as possible to use. We've installed a detection circuit inside the power station that senses when it's connected to the air-module and when the drone is powered on. Only then will the power station enable power to the drone.
The product has two buttons: an on/off button and an emergency stop. The emergency stop can shut down power in all states. As a safety precaution, the on/off button cannot power off the product when the drone is flying.
There are two indicator LEDs. The green LED activates when power is enabled. The red LED blinks when the air-module detection circuit is active and becomes solid when the drone is powered off.
A buzzer indicates when the power is turned on or off.
We've also installed a fuse. In case of a short-circuit, the fuse will protect the power station's circuit. A spare fuse is included in the mounting bracket.
The net-power cable connects to the bottom left side of the device. The user should hear a click when properly inserted. The thick black tether cable connects to the bottom right side of the device. The user should hear a click, and the arrow on the connector should point to the lock symbol. Once both cables are connected, the product is correctly installed.
